Professional aluminum metallized film manufacturer for over 13 years experience.

cladding and rendering ideas - corrugated plastic sheets

by:Cailong     2019-08-06
cladding and rendering ideas  -  corrugated plastic sheets
What is the choice?
There are many possibility of package layers, each with advantages and disadvantages, and a series of costs to consider.
There are a variety of wood to choose from for waterproof boards, as well as wood-based panels such as fiber cement and hard boards.
Vinyl coating is a waterproof board appearancealike.
Other accessories you can use include wood gaskets and V-
Seam plate, plywood, fiber cement plate and metal plate or plate. The cost of re-
The package layer varies greatly.
However, as a guide
The cladding of most materials ranges from $8500 to more than $15,000, with an average supply and installation package layer of 3-
Bedroom, 110 m² single roomsstorey house.
Flashing material, wood revelation or window sill, window, painting (where needed)
Scaffolding will cost you extra. When re-
Bag floors, be careful not to spoil the features of your house-unless you really hate them!
-Otherwise, you might get a flat result.
The Work board and sheetsAs are easy to Work and affordable, and the weatherboard is suitable for DIY installation.
They have a wide range of wood and other materials, and a wide range of profiles from most good wood plants.
The wood cladding becomes a natural insulator due to its honeycomb structure and can be used with Batten and foil to provide good-Insulation wall.
Cedar, pre-
Treating fingers-
Connecting Pine, Baltic pine, cypress pine, etc.
There is a series of shiplap and V-for vertical fixing-joint profiles.
Although the wood will last for a long time without treatment, it will turn gray and easily crack or check, so it is better to paint or oil it.
The paint must be brushed again.
Apply regularly according to the quality of the paint and the preparation of the front surface of the paint.
The cladding of manufacturing materials can also be used as manufacturing boards and plates, such as fiber cement and hard plates.
Plywood has a variety of patterns, including some that look exactly the same as the shiplap cladding.
The fiber cement board is made of cellulose fiber, cement and fine sand and is basically inert.
For the cladding, the board starts at 9.
The thickness of various patterns and profiles is 5mm, which can provide thicker plates.
Although the fiber cement does not rot, it will stain, so it is almost always painted and then looks like a normal waterproof board.
It is also very heavy.
Other common plates are Weathertex, made of crushed wood and pulp from hard wood that can grow sustainably, with three % of natural wax.
The waterproof board has a width of 200 and 300mm, has various patterns and contours, and provides primer and paint.
Another option is the inspiration before 150, using a metal coating.
It is common in old country houses and cut sheds, but you can also use it at home and relax completelyto-the-minute.
The steel itself has no thermal insulation value, but the light color reflects some summer heat.
In addition to ordinary corrugated steel, you can also use micro corrugated board (Mini Orb)
, The cost of the material is about twice the original, the color is also a lot.
Basically maintenance-
Free and the sheets of the house can be laid horizontally or vertically, but attention needs to be paid to how they are connected.
In modern cladding, they are usually screwed in the appropriate position and must be installed to allow expansion and shrinkage of the metal, especially on the walls in direct sunlight.
Increase insulation while taking this opportunity if your walls need to be stripped back to the frame, or if your home is a refrigerator in the winter, some coating can be fixed to the top there, add bulk insulation strips and reflective foil sarking.
This will improve energy efficiency and comfort in your home.
Do it yourself, or have your package layer install quote done for you.
This is also a good time to check that all of your frames are in good condition.
Rendering with ItCement is an amazing way to change your brick home.
By rendering your house, you can often mix surfaces such as bricks, blocks, plates and even waterproof plates into a unified whole.
While rendering itself is not a real package layer, it will definitely have a big impact on the look of the house.
But please consider that although the brick is basically maintained
Free, once rendered and painted, the walls will need to be repainted on a regular basis.
Your biggest decision will be to keep or add sills or delete them completely.
If the window is not defined, the final result may look a bit dull.
Even if you have a waterproof board panel, you can replace it with a fiber cement blue board, which in turn can be rendered.
Find the right accessory with a range of cement and polymer renders that fit almost any surface.
The traditional cement rendering is mixed on site and consists of cement, clean sand and cooked lime.
Lime makes the mixture more viable and adds flexibility to minimize cracks or cracking.
Polymer rendering is pre-mixed.
While you can add colors to cement and polymer renders, it's hard to get a good match with the paint color.
Color cement rendering tends to be flaky and striped, so for a uniform finish, you 'd better paint after the rendering is dry and cured.
Rendering is usually used as two or three coatings, and the final coating is smooth and rubbed.
Before painting, it takes two or three weeks to render a house, plus some time for drying and curing.
Average cost of rendering 3-
The bedroom, 110 m² single storey house starts at about $10,000 with scaffolding and extra paint.
The advantages of the vinyl coating are light weight, no paint required, and 50-year warranty.
It looks like wood but does not need maintenance-you only need to wash once in a while because there is dirt on all surfaces.
Vinyl is not suitable for Jungle Fire as a plasticprone areas.
It's designed to be at the top of the existing flat cladding, which would be great if you had old fibers.
The vinyl coating should always be fully supported because it is very flexible, so if bolts are fixed on a new home or extension, it is better to nail the plywood first.
Weather Board-
The exterior cladding of the wall includes its own styrene insulation material, which makes it have similar insulation properties to the wood waterproofing board.
The normal thickness of the insulation is 20mm, and the aluminum foil sarking is an optional additional material on the wall panel.
Most vinyl is reinstalled with permission
It will take about a week for the package layer company and installation.
Although the vinyl coating or siding is usually professionally installed, you can install it yourself.
Below is the first step on how to prepare your wall by pry open from all covered beads and any nails that protrude on the surface of the wall. Pull out nails.
The wall should be completely flat.
Step 2 level and fix the bottom start channel in place, cut according to the wall.
In some cases, it is installed to track the slope of the land.
Cut the cut in the Channel to form a right angle.
The cladding has been installed in the channel all the time, which masks any movement caused by the expansion gap and contraction.
Step 3 install the package layer into the channel and check its level.
Drive the nails through the slots in the panel, but make head a little proud, and this model is free to expand and shrink.
Otherwise they may buckle.
Step 4 Cut the cladding around the pipe with snips.
Since it is very flexible, you can simply bend it in place.
Step 5 it is easy to cut to length or along the panel using a diamond blade in the angle mill.
The traditional waterproof board material is enclosed wood with cladding.
In addition, there are composite materials such as fiber cement and hard board.
The average price of the package layer is 3-
Bedroom, 110 m² single roomsstorey house.
The Cedar waterproof board is lightweight and durable, but must be painted with oil or paint to prevent it from becoming brittle at high temperatures in Australia.
The price of the thin cedar waterproof board starts at $10,000, but the price of the thick shiplap profile is much higher.
Baltic pine is a good one-
A little cheaper than using cedar textured Cork.
Must be painted and not suitable for contact with the ground.
The cost is about $10,000. Pre-
The primer-treated pineapple is very durable and pre-treated
The primer is ready to accept the final coating of acrylic exterior wall paint.
The cost is about $15,000.
The hardboard claddingHardboard cladding is reassembled from newly grown hardwood floors, 9. 5mm thick.
There are many designs, some of which make sure your board is aligned automatically.
The fee starts at $10,000.
Fiber cement plankton fiber cement has been in existence for more than 30 years, you can see the waterproof board on the board.
While it doesn't rot, it does dye, so it looks best if it stays well painted.
The fee starts at about $10,000.
When most vinyl is sold on a supply and fixed basis, you can buy the material for yourselfinstallation.
The good thing is that it doesn't need to be painted, and it's easy to achieve a good finish with accessories and molds.
The fee starts at $8500.
Steel plates have steel products designed for walls, but you can also use many roof products such as corrugated and mini corrugated board.
Easy to fix in place, they are pre-finished products with a range of color adhesive colors, and so is maintenancefree.
The fee starts at $12,000.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Joey
Joey
Echo
Echo
Alen.Chen
Alen.Chen
Sign in with: