How to Fasten a Plexiglas Panel to an Aluminum Frame - lexan corrugated polycarbonate panels
Plexiglass is a popular alternative to glass.
It is stronger and more flexible than glass for many applications.
There are many ways to adhere plexiglass to different materials.
The plexiglass can be drilled easily, or it can be sealed onto the object with silicone.
It takes only a few minutes to fix the plexiglass on the aluminum frame, and any homeowner can handle the job with some simple instructions.
Clean the plexiglass so that there will be no dust or dust preventing installation during installation.
Wipe thoroughly with a clean rag until everything is dry.
Check the aluminum frame to determine the connection position of the plexiglass.
Measure the size of the frame with a tape measure and mark it on the plexiglass that will install it.
Sprayed on lexan polycarbonate glue, it is located in the area on the organic glass.
Spread the glue with a brush so that it covers the entire area within the mark.
Repeat the process on the other side of the plexiglass and expand it to keep it horizontal on the surface.
Arrange the plexiglass to the metal frame and push the frame down so that the glue can be attached to the aluminum.
Move your hand up and down for a few minutes until it is firmly in place.
Check out the plexiglass and aluminum frame to make sure there is no glue to go through when you push down and wipe with a rag if necessary.
Clean the edge of the glass to make sure there is no glue penetration.