Professional aluminum metallized film manufacturer for over 13 years experience.

how to paint on a polycarbonite sheet - polycarbonate

by:Cailong     2019-08-01
how to paint on a polycarbonite sheet  -  polycarbonate
Polycarbonate is a thermoplastic polymer that is durable but easy to form and thermoform.
These properties allow plastics to be used in a variety of products including glasses and electronics.
Polycarbonate boards are also used for construction and can be referenced by trademark names such as Lexan, Makrolon or Makroclear.
If you prepare correctly, you can add a paint finish to the polycarbonate sheet.
If you do not properly glue the polycarbonate, the failure of the finish will be inevitable.
Clean the polycarbonate tablets with clear water-
Soap made of nylon sponge.
Thoroughly rinse all residues on the pc using a wet rag, otherwise the primer will not attach to it.
Dry the sheets for two hours.
The polycarbonate sheet is polished to improve the bonding quality.
Polish polycarbonate with 100-
Sandpaper and a powerful Sander until the fingers feel rough.
Take it slowly and thoroughly, otherwise the adhesive primer will eventually fall off.
Protect the surface next to the pc sheet with painter tape.
Cover the floor under the polyester with a drop cloth.
Apply the acrylic adhesive spray primer to the polycarbonate board. Maintain an 8-
Space in inches between the tips of the polyester and spray to prevent sagging.
Let the sheets dry for at least two hours.
Apply acrylic spray enamel to a polycarbonate board. Maintain an 8-
Space in inches between the tips of the polyester and spray to prevent sagging.
Let the sheets dry for at least two hours.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Joey
Joey
Echo
Echo
Alen.Chen
Alen.Chen
Sign in with: