kinds of window tinting film - colored glass film
The decorative window film has a variety of functions, and in the home owner, its popularity is actually greatly improved.
Watching movies avoid direct sunlight entering the space, thus preventing bad glare.
For more information, click here.
All the window coloring films are from . . . . . . Well, the film is a polyester product, ranging in thickness from 2 to 7 miles, which is about related to it. 002 to. 007 inches.
Manufacturers of window coloring films may also include chemical UV interceptors, and if the film is only for this function, there is no need to add products to the film.
The most standard of color film includes the basic layer of color film, which is used to absorb heat and reduce observer exposure.
Due to the application of the color film in the window room, the Heat part of the film Falling remains in the glass itself, and the external air movement helps to take away a lot of heat during regular driving.
The deposition innovation involves a more complex process in which the film passes through the inclusion of a particular type of metal ingot (usually nickel-
Chrome or aluminum.
Then reduce the pressure in the tank, produce a synthetic vacuum, then drown with hydrogen, then heat the ingot, triggering the metal discharge to move to the fragments of the surface area of the film.
As with the transfer film, the sputtering is also carried out in the vacuum chamber, but the metallized properties are obtained at the atomic level.
In view of the nature of the transfer film due to the process, a very limited number of metals should be used, and more than 20 different types of metals can be used for sputtering, making the procedure more flexible and resulting in a lighter and thinner finish.
These metal films are a little more expensive than color films, which makes this classification close to the top of the cost furnace for colored films.
The mixed film obtained the best of both worlds from the film types mentioned earlier, using color film layers and reflective metal layers to achieve excellent results.
By combining the reflective home of the metal with the absorption quality of the color film, fewer products are required in each product, often resulting in a slightly lighter color than any type of film previously discussed, it has the same or higher heat suppression capability and has a low reflectivity.
Using metals and dyes found in other films, ceramic tone films are all made with nanotechnology, although beyond the thermal insulation of even the best metal films, there is no signal interference usually associated with them.
Ceramic Films are also very resistant to fading, splitting, dyeing, gurgling and many other shortcomings related to other film types.
Normally, it's a lot more expensive than other apps, but if you're looking for the best window tone options out of the box, ceramic film is definitely the highest quality film on the market.
Manufacturers of home window film San Antonio may also integrate chemical UV interceptors, and there is no need to add products to the film if the film only provides this function.
These metal films are a little more expensive than color films, which makes this classification the highest cost of approaching colored films.
The mixed film obtained the best of both worlds from the above film types, using color film layers and reflective metal layers to achieve remarkable results.
By combining the reflective apartment of the metal with the absorption quality of the color film, the demand for each product is reduced and usually produces a lighter tone than any film type previously discussed, it has an equivalent or higher heat suppression capability and has a low reflectivity.
The ceramic tone film neither utilizes the metal found in other films nor uses dyes, but is manufactured with nanotechnology, while surpassing the thermal insulation capacity of even the best metal film, there is no signal interference usually associated with it.