Professional aluminum metallized film manufacturer for over 13 years experience.

Cailong  > 

AI - Page Sitemap

 > 

Cailong gloss metalized film supplier for decorative materials

Cailong gloss metalized film supplier for decorative materials

Cailong gloss metalized film supplier for decorative materials

Material
PET
Thickness
6 mic~100mic
Length
customized
Width
customized
Certificate
RoHs, FDA, EU
Packing
Moisture Proof packaging
MOQ
1000 kgs
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:

Cailong gloss metalized film supplier for decorative materials-1              Cailong gloss metalized film supplier for decorative materials-2


Item No.

 VMPET- GF01

  VMPET- GF02

Specification 

●Thickness:  6 mic~100mic ; Width and Length can be customized.

Properties

● High barrier and ultra-high barrier: significantly improve the flavor retention and preservation performance of food, and extend the shelf life of food;

● High adhesion of aluminum layer: Adhesion≥2.5N/15mm

● more environmentally friendly and meet the requirements of new national standards, FDA, EU, reach, ROHS, etc;

Application

● Flexible Packaging Lamination;

● Application and packaging of electronics, decorative materials, labels, cosmetics and metal products;


Technical Data:


Item No.

Testing methods

  Units

Sdandard values

VMPET-GFO1

VMPET-GF02

Thickness

GB/T6672

μm

12

Al Thickness

GB/T15717

OD

1.95

Density

GB/T 1033.1-2008

ɡ/cm3

1.4

Adhesion of Aluminum Layer

EAA testing

N/15mm

≥2.5

Surface tension

Al side

GB/T14216-2008

mN/m

≥48

Non-Al side

42

Tensile strength

MD

GB/T 1040.3

Mpa

≥170

TD

≥170

Elongation at break

MD

GB/T 1040.3

Mpa

≥80

TD

≥80

WVTR

ASTM D-3985

g/·24h

0.5

1.5

O2TR

ASTM F-1249

cc/·24h

0.5

1.5


Comparing with the normal production


Item

Normal Metallized PET Film

High Adhesion Metallized PET Film

Feature

Application

Feature

Application

Aluminum Layer

The adhesion between the film and the aluminum layer is low, and the peel strength is less than 1.5n/15mm

Three layer composite structure is usually used for packaging composite bags with low requirements for aluminum layer fastness

The adhesion between the film and the aluminum layer is high, and the peel strength can reach more than 3N / 15mm

For composite packaging with high peel strength requirements.

Aluminum Thickness

Conventional aluminum layer thickness. The adhesion will decrease when increasing the thickness of the aluminum layer

Conventional packaging use

Due to the high fastness of aluminum layer, it can increase the thickness of aluminum layer without dealumination. Extend the shelf life of the content, and have good fragrance retention

Suitable for milk powder, coffee and snack packaging, can extend the shelf life of the contents, and good fragrance.

Barrier Grade

With a certain barrier property after aluminum plating

Conventional packaging use

Excellent Barrier properties

Can replace some aluminum foil composite structure packaging


Important note:

the final performance of the product is related to the composite process, and poor use will cause damage to the product;

for other special requirements of customers, it is better to communicate with our technical department in detail, so that the products can be more suitable for customers.

The above information only provides some reference suggestions for customer's experiment or use, rather than being responsible for your specific use methods and application requirements.



Product Message
Chat Online
Chat Online
Chat Online inputting...
Joey
Joey
Echo
Echo
Alen.Chen
Alen.Chen
Sign in with: